+86-574-87676065 info@lehonb.com
English
Views: 3 Author: Site Editor Publish Time: 2020-05-24 Origin: Site
With the gradual control of the domestic epidemic, enterprises in various regions have also started to resume production, and the lives of Chinese people have begun to get on track. However, although the situation of the epidemic has improved, the fear of the epidemic makes masks one of the necessities in 2020. This has led to an increase in the production of masks, and the maintenance and replacement of mask machines has become the norm.
The following is the BOM table and maintenance methods of the transmission parts required by the mask machine for reference!
The bearing is an important part of the mask machine. It is used to fix the shaft so that it can only rotate, and control its axial and radial movements. At the same time, it reduces the friction coefficient during its movement and ensures its rotation accuracy.
Pneumatic parts are components that do work through the force generated by the pressure or expansion of the gas. The mechanical parts that convert the elastic energy of compressed air into kinetic energy are a form of power transmission and an energy conversion device that uses gas pressure to transfer energy.
The transmission belt, also known as the conveyor belt, is the transmission medium in the transmission belt system of the mask machine, which is used to drive the material to travel.
The motor refers to an electromagnetic device that realizes the conversion or transmission of electric energy according to the law of electromagnetic induction. The main function is to convert mechanical energy into electrical energy.
The maintenance of the mask machine mainly lies in the appearance, transmission system, electrical system, ultrasound system and power supply system.
The masks produced by our equipment are to be worn on the face, and some medical masks need to be brought into the operating room, so all the mask production needs is to keep the equipment clean and tidy. At the end of the day, arrange to turn off the power equipment workbench and clean it with alcohol and other disinfectant and volatile cleaning fluid.
The transmission system of the labor protection mask machine includes motors, reducers, gears, sprockets, chains, belts and other accessories. Check whether there is any dust or other things on the surface of the motor that affect the heat dissipation. The gears and sprockets are regularly oiled to check whether there is something adhering to it, whether the tension of the chain is appropriate, and whether the connection between the transmission components of the screw is loose. If the lubricating oil of the reducer is enough, it needs to be changed once within 1000-1500 hours.
Check whether the circuit connector of the labor mask machine is loose, the power line and signal line are worn and aging, the electrical parts are loose, the electrical box is clean and dry, and the exhaust fan is working properly.
Check whether the labor protection mask machine is clean of the ultrasonic system, especially the ultrasonic electric box, the head (enlarged) must be dry-cleaned and there is no water accumulation, and the connection line must be strong. Always check the degree of wear of the ultrasonic welding head. Observe the pointer range of ultrasonic electric voltmeter and ammeter.
Air filter cover-check whether the labor mask machine has water, air compressor discharge (air compressor discharge: high humidity in the area, discharge to the compressor every day). Check the air pipe and cylinder for leaks, and the position and operation of the cylinder's magnetic sensor.
Anything information about mask machine, you can communicate with me by mail.